Floor maintenance knowl edge

maintainance

1. Dry mopping: Remove dust and dirt from the floor. Use dry or damp yarn, microfiber or other available dry mop.

2. Vacuum cleaner cleaning: Use a vacuum cleaner to remove dust and loose dirt from the floor. This cleaning method can be used in place of a mop in areas with restricted operation.

3. Wet mop: The mop should be slightly moistened with water or detergent first. The method is to use a special cleaning winch to squeeze out the excess water of the mop. In addition, you can also spray water or detergent on the mop. Be careful not to allow water to collect on the floor. The floor must be able to dry completely within 15-20 seconds of wiping.

Maintenance matters

1. All kinds of dirt on the ground should be removed in time. The first maintenance of the stone-plastic floor should be carried out 24 hours after the completion of the floor construction.

2. It is absolutely forbidden to soak the floor in open water. Although some floors use waterproof glue to cut off the water source (such as floor drains, water rooms, etc.), long-term soaking in water will seriously affect the service life of the floor. Use it in time during the cleaning process. The suction machine sucks the sewage dry.

3. It is absolutely forbidden to use hard and rough cleaning tools (such as steel balls, scouring pads, etc.) to prevent sharp objects from hitting the elastic floor.

4. It is strongly recommended to place rubbing mats at the entrance of public places with high traffic flow to prevent dirt, sand, etc. from being brought in to stain and scratch the floor.

5. Avoid high-concentration solvents such as toluene, banana water, strong acids, and strong alkali solutions on the floor surface, and avoid using inappropriate tools and sharps to scrape or damage the floor surface.

6. Heavy furniture or household appliances should be lifted rather than dragged. It is recommended that all stools be fitted with foot covers.

7. Under normal circumstances, the stone-plastic lock floor only needs to be cleaned by vacuuming or wiping with a damp cloth or mop if necessary. Neutral detergent and warm water can be used to remove some stains.

8. It is recommended to place a floor mat to protect the floor in places that are often under heavy pressure.

Copyright©2023 Dongyang City Plastics Co.,Ltd.